Treatment and recycling

A modular treatment train

A complete treatment train, or tertiary treatment downstream of your wastewater treatment plant, sized to your effluent and the intended reuse.

The treatment train

From your effluent to reuse

Inlet control: continuous measurementOutlet control: measurement and proof
Inlet

Your effluent

Raw or already treated effluent

Module

Equalization

Flow and load balancing

Module

Flotation

Oils, greases, suspended solids

Module

Biological treatment

MBBR biofilm, organic load

Module

BioFiltration

Zeolite, controlled bacteria, UV-C / ozone, activated carbon

Module

Membranes

UF / reverse osmosis: polishing

Outlet

Reuse

Recycled water sent back to the process

Additional modules

Less withdrawal, zero liquid discharge¹

Rainwater reduces withdrawals. Phytoremediation (willows, poplars) treats and stabilizes the membrane concentrate, producing usable biomass. Each module is validated independently and integrates with your existing equipment.

Rainwater harvesting and reuse

Roof runoff collected, stored and treated for reuse.

Phytoremediation

Concentrate evapotranspired, zero liquid discharge¹.

Storage

Patented structured storage, loop buffer.

PILOTE provides real-time supervision, inlet and outlet controls, and control of the entire treatment train.

Discover PILOTE
Target values

Quantified performance objectives

> 95%

oil removal (flotation target)

< 5 mg/L

BOD at biofiltration outlet

Zero

liquid discharge¹ through phytoremediation

up to 20%

of well water replaced by rainwater

Design target values from the reference study. See the reference

Do you really know the quality of your water, at process inlet and outlet?

Let's start with a water audit: a site-specific assessment to identify your savings potential and define the right solution.

Request an audit